Installation Guide

Step 1 — Clean the Window

Step 1 — Clean the Window

Use a microfiber cloth to clean the glass thoroughly for best adhesion.

Step 2 — Measurement

Step 2 — Measurement

Measure the window and position the tint film accurately before cutting.

Step 3 — Trim Excess Film

Step 3 — Trim Excess Tint Film

Trim the film carefully to match your window shape for a perfect fit.

Step 4 — Remove the Release Liner

Peel off the liner to expose the adhesive side of the tint film.

Step 5 — Position Tint Film

Step 5 — Position the Tint Film

Place the film onto the glass and adjust it into the correct position.

Step 6 — Remove Bubbles

Step 6 — Scrape & Remove Bubbles

Use a squeegee to push out any air bubbles for a smooth finish.

Step 7 — Remove Door Panel

Step 7 — Remove Door Panel

Carefully remove the door panel to access the power supply and wiring.

Step 8 — Connect to ACC Power

Step 8 — Connect Tint to ACC Power Supply

Connect the tint system’s wiring to the ACC circuit for power.

Step 9 — Reinstall Door Panel

Step 9 — Install Door Panel Back

Screw the panel back on securely after completing wiring.

Step 10 — Smart Tint Ready to Use

Step 10 — Smart Tint Ready to Use

Your smart tint is now installed — test with remote/ACC to confirm smooth operation.

For More detailed Instructions Watch Our Videos Below